Time:2021-12-10
Quartz is also called silica or silica. It is widely distributed in nature, such as quartz, quartz sand and so on. White or colorless, the ones with higher iron content are light yellow. It is insoluble in water and slightly soluble in general acids, but it is soluble in hydrofluoric acid and hot concentrated phosphoric acid, and can work with molten alkalis. Used to make glass, water glass, pottery, enamel, refractory materials, ferrosilicon, molding sand, elemental silicon, etc.
Quartz is an inorganic mineral. The main component is silicon dioxide. It is a translucent or opaque crystal, generally milky white with a hard texture. Quartz is a mineral resource with very stable physical and chemical properties. The crystal belongs to the oxide mineral of the trigonal crystal system, that is, low-temperature quartz, which is the most widely distributed mineral species in the quartz group of minerals. Quartz in a broad sense also includes high-temperature quartz. Quartz block, also known as silica, is mainly used for the production of quartz sand (also known as silica sand), and is also a raw material for quartz refractories and firing ferrosilicon. Quartz sand is an important industrial mineral raw material, which is widely used in glass, casting, ceramics and refractory materials, metallurgy, construction, chemical industry, plastics, rubber, abrasives and other industries.
The Raymond mill is suitable for processing materials with Mohs hardness below 9 grade. It can be powdered at a time when the material is fed. The absence of a screen will not cause the blockage of the equipment. The characteristics of the materials processed by Raymond Mill are big but not small, hard but soft. This means that the output of harder particles is lower than that of smaller ones, and the output of large particles is higher than that of powder. The Raymond Mill adopts suspended rollers to achieve crushing effect, which is energy-saving and environmentally friendly without pollution. Raymond mill processing quartz powder must first use the crusher to process the mixed material below 3-5CM into the working cavity of the main machine, and then the qualified product will come out of the discharge port. The fineness of adjustment is adjusted by the analysis machine and the air door. ,convenient.