Navigation Menu
Menu
You are here : Home > Products

Contact Us

Tel: +86-21-68763311
Fax: +86-21-68763366
Email: joyal@crusherinc.com

Ultra-fine powder grinding machine price, super fine grinding recommended


Time:2019-08-15

What is the price of ultrafine powder mill? First of all, we recommend Shanghai Joyal’s three-ring medium-speed micro-grinding. This micro-powder is mainly suitable for medium and low hardness, non-flammable and explosive various brittle materials with Mohs hardness lower than grade 6. It can be used as desulfurization. Mill and mill. At present, the particle size of the fine powder of the three-ring medium-speed micro-grinding is arbitrarily adjusted between 325-3000 mesh, and the output can reach 0.5-12 tons per hour.


First, third ring medium speed micro-grinding working principle
The three-ring medium-speed micro-grinding grinds the bulk material into small particles after being crushed into small particles by the hammer crusher, and then is sent to the storage bin by the hoist, and then the material is evenly sent to the turntable through the vibration feeder and the inclined feeding pipe. On the upper bulk plate. The material is scattered to the circumference of the circle under the action of centrifugal force, and falls into the raceway of the grinding ring, which is impacted, rolled and ground by the ring roller, processed into a powder through the processing of the three-layer loop, and the high-pressure fan passes the external air through suction. Inhaled into the machine and the pulverized material is brought into the classifier. The rotating impeller in the ultrafine powder mill is used to make the coarse material fall back to the regrind. The fine powder that meets the requirements enters the cyclone powder collector with the airflow and is discharged from the lower discharge valve, which is the finished product, with a small amount. The fine dust flow is discharged through the fan and muffler after passing through the pulse dust collector.
Second and third ring medium speed micro-grinding performance advantages
1, efficient, energy saving
In the case of the same fineness of the finished product and the same motor power, the output of the jet mill, the agitator mill and the ball mill is more than double.
2, the wearing parts have a long service life
The grinding roller and the grinding ring are forged by special materials, so that the utilization degree is greatly improved. Generally, it can last for more than one year. When processing calcium carbonate and calcite, the service life can reach 2-5 years.
3, high security and reliability
Since there is no rolling bearing or screw in the grinding chamber, there is no problem that the bearing and its sealing member are vulnerable, and there is no problem that the screw is loose and the machine is destroyed.
4, environmental protection, cleaning
The dust collector is used to capture dust, and the muffler is used to reduce noise. It is environmentally friendly and clean.

Previous: