Time:2023-04-21
If the grinding roller shaft is bent and deformed during the operation of the bentonite mill, the normal operation of the equipment cannot be guaranteed. So, what are the reasons for the deformation of the roller shaft of the bentonite mill?
1. Each type of bentonite mill has different requirements for the feed particle size. When the feed particle size is too large, the bentonite material will collide with the main shaft with the rotation of the mill. many. In this way, it will inevitably cause the deformation of the grinding roller shaft of the bentonite mill. Therefore, when we grind the bentonite mill, we must pay attention to the control of the feed particle size, so as not to affect the grinding roller shaft.
2. In order to greatly increase the processing output, some users overload the bentonite mill for a long time, which greatly increases the pressure on each component during the operation of the mill, thereby aggravating the wear of the grinding roller shaft and gradually causing it to bend. Therefore, maintaining the correct operation mode and avoiding the long-term overload operation of the bentonite mill is an important factor to prevent the deformation of the grinding roller shaft.
3. Since bentonite mills are generally produced in the open air, and the materials they grind contain a certain amount of water, it is inevitable that the equipment will be rusted after a long period of use. If it is dealt with in time, it will greatly reduce the working intensity of the equipment, and even cause the mill to run unstable. In this way, during the operation of the bentonite mill, if some rust is mixed with the material, it will also affect the quality of the finished product after processing. This requires us to diligently observe the use status of the equipment in the bentonite grinding operation, and to repair and adjust the abnormal phenomena in time.