Navigation Menu
Menu
You are here : Home > Products

The performance characteristics of the crusher in the sand and gravel production line


Time:2022-03-04

The performance characteristics of the crusher in the sand and gravel production line:

1. The crushing ratio is large, up to 10-15, the maximum allowed part of the material can be up to 400mm, and the minimum output can be up to 20mm, so it has the double crushing function of primary coarse crushing and secondary fine crushing;

2. The crushing cavity is deep and has no dead zone, which improves the feeding capacity and output;

3. Large processing capacity and low energy consumption, the processing capacity is increased by 30-65% compared with ordinary jaw crushers, and the energy consumption is reduced by 30%;

4. The particle size of the product is small. Under the same process, it is 40-50% lower than ordinary fine jaw crushers such as PEX150├Ś700, and P80 can reach below 10mm;

5. The wear is small, and the life of the jaw plate can be extended by more than 3-5 times under the same process conditions.

6. It has a wide range of applications, and has achieved good results in fine crushing of hard materials such as quartzite, magnetite, basalt, and steel slag.

Previous: Next: