Time:2023-03-16
Raymond mill is now widely used in mining, building materials, chemical industry, metallurgy and other industries. Today we will explain the reasons for the low powder output rate of barite Raymond mill.
1. The powder locker is not tightly sealed
If the powder locker is not properly sealed during the milling process of the Raymond mill, powder suction will occur, resulting in no powder or less powder output. Therefore, check the seal of the powder locker and adjust the seal. degree.
2. The analysis machine did not play a role
The analysis machine of the Raymond mill is responsible for analyzing the size of the finished powder, whether it meets the finished product standard, and whether it needs to be sanded again. If the blades of the analysis machine are seriously worn, it will not be able to achieve the classification function, which will cause excessive powder output. Thick or too thin, this situation can be solved by replacing a new blade.
3. The fan is not adjusted properly
If the air volume of the Raymond mill fan is not adjusted properly, the air volume is too large, which will also cause the powder output of the mill to be abnormal, the powder output will be too thick, and the air volume is too small, the powder output will be too fine. Under abnormal circumstances, the air volume of the fan should be adjusted to correct the powder particle size.
4. The shovel breaks down
The shovel of Raymond Mill is responsible for scooping up the materials. When the shovel is used for a period of time or the quality is not good enough, the wear and tear will be greater, and the material will not be able to be shoveled, and it will also cause no powder or less powder. Need to replace the new blade, so as to ensure the normal operation of the equipment.