Time:2017-04-10
Raymond mill is the working principle of the material into the host grinding room, the spindle rotation due to the role of centrifugal force, the roller swing outward, pressed against the grinding ring, the blade will be shovel material sent to the grinding roller and grinding ring Between, with the roller rolling to achieve grinding, grinding purposes. Material grinding, the powder with the blower circulating air through the analysis machine for sorting, fineness of the material back to the grinding room grinding, qualified fine powder with the air into the whirlpool collector, the powder tube discharge is finished. The air flow through the cyclone collector and then into the blower to form a closed loop, so that the machine works continuously. Yu Feng is through the extra duct into the dust collector after purification by the machine outside the machine. Check the Raymond Mill running as follows:
1, simulation test method: This method is simulated in a variety of working conditions, the study of extreme technical status. To test the material properties, wear properties, corrosion performance. The method has a short test time and poor reliability.
2, production test method: the normal operation of several equipment, through continuous observation and detection, recording, analysis, synthesis, induction, this method is more reliable, but with a longer time, high cost.
3, calculation and analysis: through mathematical calculations to predict, this method does not require a lot of time and safe and reliable, so the use of high.