Navigation Menu
Menu
You are here : Home > Products

Contact Us

Tel: +86-21-68763311
Fax: +86-21-68763366
Email: joyal@crusherinc.com

Feldspar Superfine Mill meets your milling requirements


Time:2019-06-24

The feldspar ultra-fine grinding machine is mainly suitable for the ultra-fine powder processing of non-inflammable and explosive brittle materials with medium and low hardness and Mohs hardness ≤7, such as calcite, limestone, feldspar, carbon black, kaolin, Bentonite, talc, mica, illite, pyrophyllite, vermiculite, sepiolite, attapulgite, rectorite, diatomaceous earth, barite, gypsum, alum, graphite, fluorite, phosphate rock, potassium ore More than 100 kinds of materials such as pumice, the output can reach 0.5-12 tons per hour.


The composition of the feldspar superfine mill:
The complete configuration of feldspar superfine grinding machine includes crusher, bucket elevator, storage bin, vibrating feeder, superfine mill host, frequency classifier, double cyclone powder collector, pulse dust removal system, high pressure Fans, air compressors, electrical control systems.
The working principle of feldspar superfine mill:
During operation, the main motor of the mill drives the spindle and the turntable through the reducer, and the roller pin on the edge of the turner drives dozens of grinding rollers to roll in the grinding ring raceway.
The feldspar raw mineral material is broken into small particles by a hammer crusher and then sent to the storage bin by the hoist. Then, through the vibrating feeder and the inclined feeding pipe, the feldspar particles are evenly sent to the bulk material of the upper part of the turntable. On the plate.
The feldspar particles are scattered to the circumference of the circle under the action of centrifugal force, and fall into the raceway of the grinding ring, which is impacted, rolled and ground by the ring roller. After three layers of loop processing, it becomes feldspar powder, and the high pressure fan will be pumped. The outside air is sucked into the machine, and the pulverized feldspar powder is brought into the classifier.
The impeller rotating inside the classifier re-grinds the coarse feldspar powder, and the fine powder that meets the requirements enters the cyclone dust collector with the airflow and is discharged from the lower discharge valve to be the final feldspar ultrafine powder. A small amount of fine dust is purified by a pulse dust collector and discharged through a fan and muffler.

In the glass ceramic industry, many customers require 80-300 mesh. The feldspar mill manufactured by Shanghai Joyal is a grinding device with such a fineness interval, which can directly process ore from a large block to 80-400 mesh, and The iron content of the product can be less than 0.05%. For high-fineness powder of 400 mesh or more, our company has ultra-fine grinding, which can process materials below 30 cm to 400-2500 mesh, the screening rate is 97%, and the iron content is less than 0.05%, ensuring that the powder reaches the high end. Powder requirements.

Previous: Next: